техническая литература
Practical Methods for Biocatalysis and Biotransformations
John Whittall
Biocatalysts are increasingly used by chemists engaged in fine chemical synthesis within both industry and academia. Today, there exists a huge choice of high-tech enzymes and whole cell biocatalysts, which add enormously to the repertoire of...
Porous Silicon Carbide and Gallium Nitride
Randall Feenstra M.
Porous Silicon Carbide and Gallium Nitride: Epitaxy, Catalysis, and Biotechnology Applications presents the state-of-the-art in knowledge and applications of porous semiconductor materials having a wide band gap. This comprehensive reference...
Handbook of Infrared Spectroscopy of Ultrathin Films
Irina Chernyshova
Because of the rapid increase in commercially available Fourier transform infrared spectrometers and computers over the past ten years, it has now become feasible to use IR spectrometry to characterize very thin films at extended interfaces. At...
TMS 2012 141st Annual Meeting and Exhibition, Materials Properties, Characterization, and Modeling
The Minerals, Metals & Materials Society (TMS)
This book contains chapters on cutting-edge developments presented at the TMS annual conference of 2012.
The Selected Works of John W. Cahn
William Johnson C.
This book represents a collection of 30 selected papers from the work of John W. Cahn. Dr. Cahn is Senior Fellow at the Materials Science and Engineering Laboratory of the National Institute of Standards and Technology, and is widely recognized...
Proceedings of the 12th Pacific Rim Conference on Ceramic and Glass Technology; Ceramic Transactions, Volume 264
Tatsuki Ohji
Ceramic Transactions, Volume 264, Proceedings of the 12th Pacific Rim Conference on Ceramic and Glass Technology Dileep Singh, Manabu Fukushima, Young-Wook Kim, Kiyoshi Shimamura, Nobuhito Imanaka, Tatsuki Ohji, Jake Amoroso, and Michael...
Zinc Oxide Materials for Electronic and Optoelectronic Device Applications
Safa Kasap
Zinc Oxide (ZnO) powder has been widely used as a white paint pigment and industrial processing chemical for nearly 150 years. However, following a rediscovery of ZnO and its potential applications in the 1950s, science and industry alike began...
Continuum Scale Simulation of Engineering Materials
Dierk Raabe
This book fills a gap by presenting our current knowledge and understanding of continuum-based concepts behind computational methods used for microstructure and process simulation of engineering materials above the atomic scale. The volume...
Thermal Spraying for Power Generation Components
Vladimir Belashchenko
Thousands of patents address new coating types, new developments, new chemical compositions. However, sometimes coatings is still considered as an «art». This book now deals with questions that are essential for a good performance of this «art»:...
Surface Analysis with STM and AFM
Myung-Hwan Whangbo
Scanning tunneling microscopy (STM) and atomic force microscopy (AFM) are powerful tools for surface examination. In the past, many STM and AFM studies led to erroneous conclusions due to lack of proper theoretical considerations and of an...
Nanoscale Characterization of Surfaces and Interfaces
N. DiNardo John
Derived from the highly acclaimed series Materials Science and Technology, this book provides in-depth coverage of STM, AFM, and related non-contact nanoscale probes along with detailed applications, such as the manipulation of atoms and...
Hydrogen as a Future Energy Carrier
Andreas Borgschulte
This book fills the gap for concise but comprehensive literature on this interdisciplinary topic, involving chemical, physical, biological and engineering challenges. It provides broad coverage of the most important fields of modern hydrogen...
66th Porcelain Enamel Institute Technical Forum
Steve Kilczewski
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and...
Mechanical Properties and Performance of Engineering Ceramics and Composites
Edgar Lara-Curzio
Over 45 papers included in this collection present the latest advances in research and development on the processing, mechanics and mechanical properties of advanced ceramics and composites. The focus is on the underlying fundamental linkages...
Advances in Solid Oxide Fuel Cells
Dongming Zhu
Due to its many potential benefits, including high electrical efficiency and low environmental emissions, solid oxide fuel cell (SOFC) technology is the subject of extensive research and development efforts by national laboratories,...
Developments in Advanced Ceramics and Composites
Peter Filip
Over 40 papers are included in this volume from six symposia held during the 29th International Conference on Advanced Ceramics and Composites. Topics include ceramics and environmental applications, characterization tools for materials in...
Advances in Solid Oxide Fuel Cells II
Edgar Lara-Curzio
Due to its many potential benefits, including high electrical efficiency and low environmental emissions, solid oxide fuel cell (SOFC) technology is the subject of extensive research and development efforts by national laboratories,...
Synthesis and Processing of Nanostructured Materials
Edgar Lara-Curzio
Advances in nanotechnology offer great new promise in new multifunctional systems that experts predict to be a major economic force within the next decade. Ceramic materials enable new developments in such areas as electronics and displays,...
27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites - A
Hua-Tay Lin
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and...
27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites - B
Hua-Tay Lin
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and...
International Forum on Structural Ceramics Joining
John Wachtman B.
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and...
Ceramic Manufacturing Council - Kilns and Firing
John Wachtman B.
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and...
1994 Ceramic Manufacturers and Suppliers Worskhop
John Wachtman B.
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and...
Materials and Equipment - Whitewares - Structural Clay
William Smothers J.
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and...
Mechanical Properties and Performance of Engineering Ceramics and Composites IV
Andrew Wereszczak
This book provides a one-stop resource with current research on advanced ceramics. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008....
Processing of Nanoparticle Structures and Composites
Tom Hinklin
This volume features papers from the Controlled Processing of Nanoparticle Structures and Composites symposia held during the 2008 Materials Science and Technology conference (MS&T08). It provides a useful one-stop resource for understanding the...
Advances in Ceramic Matrix Composites VIII
Mrityunjay Singh
Ceramic composites are leading candidate materials for high-temperature structural applications. This new book updates readers on the latest in state-of-the-art ceramic composite processing and fabrication methods, process modeling,...
Indentation Techniques in Ceramic Materials Characterization
Ahmad Solomah G.
Indentation techniques have become widely used in the characterization of brittle solids due to their simplicity, cost effectiveness, rapidness, and maybe most importantly, the indenter itself can be used as a mechanical microprobe in thin...
Advances in Photonic Materials and Devices
Suhas Bhandarkar
Photonics is a critically important technology. It complements maturing micro-electronics to create new directions that impacts a wide-ranging array of other industries. From a materials standpoint, this technology uses essentially all the...
Advances in Glass and Optical Materials
Shibin Jiang
This proceedings volume contains papers on the current research and development in the area of glass and optical materials. Papers include topics on glasses for bioapplications, glass fibers for optical and insulating applications,...
Fatigue Life Analyses of Welded Structures
Tom Lassen
Avoiding or controlling fatigue damage is a major issue in the design and inspection of welded structures subjected to dynamic loading. Life predictions are usually used for safe life analysis, i.e. for verifying that it is very unlikely that...
Structure-Property Relations in Nonferrous Metals
Alan Russell
This junior/senior textbook presents fundamental concepts of structure property relations and a description of how these concpets apply to every metallic element except iron. Part One of the book describes general concepts of crystal structure,...
Integrated Computational Materials Engineering (ICME) for Metals
Mark Horstemeyer F.
Focuses entirely on demystifying the field and subject of ICME and provides step-by-step guidance on its industrial application via case studies This highly-anticipated follow-up to Mark F. Horstemeyer’s pedagogical book on Integrated...
Materials and Surface Engineering in Tribology
Jamal Takadoum
This title is designed to provide a clear and comprehensive overview of tribology. The book introduces the notion of a surface in tribology where a solid surface is described from topographical, structural, mechanical, and energetic...
RF and Microwave Transistor Oscillator Design
Andrei Grebennikov
The increase of consumer electronics and communications applications using Radio Frequency (RF) and microwave circuits has implications for oscillator design. Applications working at higher frequencies and using novel technologies have led to a...
Microstrip Filters for RF / Microwave Applications
Jia-Shen Hong G.
Advanced, specialized coverage of microstrip filter design Microstrip Filters for RF/Microwave Applications is the only professional reference focusing solely on microstrip filters. It offers a unique and comprehensive treatment of filters based...
RF / Microwave Interaction with Biological Tissues
Arye Rosen
From engineering fundamentals to cutting-edge clinical applications This book examines the biological effects of RF/microwaves and their medical applications. Readers will discover new developments in therapeutic applications in such areas as...
Nanotechnology Applications to Telecommunications and Networking
Daniel Minoli
Be a part of the nanotechnology revolution in telecommunications This book provides a unique and thought-provoking perspective on how nanotechnology is poised to revolutionize the telecommunications, computing, and networking industries. The...
Combinatorial Optimization and Theoretical Computer Science
Vangelis Th. Paschos
This volume is dedicated to the theme “Combinatorial Optimization – Theoretical Computer Science: Interfaces and Perspectives” and has two main objectives: the first is to show that bringing together operational research and theoretical computer...
Insulators for Icing and Polluted Environments
Masoud Farzaneh
Learn to correct icing and pollution problems in electrical line insulation Written by prominent experts in the field, this book takes an in-depth look at the issues of electrical insulators for icing and polluted environments. It shows:...
Pulse-width Modulated DC-DC Power Converters
Marian Kazimierczuk K.
This book studies switch-mode power supplies (SMPS) in great detail. This type of converter changes an unregulated DC voltage into a high-frequency pulse-width modulated (PWM) voltage controlled by varying the duty cycle, then changes the PWM AC...
Wind Energy Generation: Modelling and Control
Michael Hughes
With increasing concern over climate change and the security of energy supplies, wind power is emerging as an important source of electrical energy throughout the world. Modern wind turbines use advanced power electronics to provide efficient...
Market Operations in Electric Power Systems
Mohammad Shahidehpour
An essential overview of post-deregulation market operations in electrical power systems Until recently the U.S. electricity industry was dominated by vertically integrated utilities. It is now evolving into a distributive and competitive market...
Reliability of Computer Systems and Networks
Martin Shooman L.
With computers becoming embedded as controllers in everything from network servers to the routing of subway schedules to NASA missions, there is a critical need to ensure that systems continue to function even when a component fails. In this...
Uncertainty in Remote Sensing and GIS
Peter Atkinson M.
Remote sensing and geographical information science (GIS) have advanced considerably in recent years. However, the potential of remote sensing and GIS within the environmental sciences is limited by uncertainty, especially in connection with the...
Quantitative Remote Sensing of Land Surfaces
Shunlin Liang
Processing the vast amounts of data on the Earth's land surface environment generated by NASA's and other international satellite programs is a significant challenge. Filling a gap between the theoretical, physically-based modelling and specific...
Space-Time Processing for MIMO Communications
Alex Gershman
Driven by the desire to boost the quality of service of wireless systems closer to that afforded by wireline systems, space-time processing for multiple-input multiple-output (MIMO) wireless communications research has drawn remarkable interest...
Theory and Applications of OFDM and CDMA
Henrik Schulze
Theory and Applications of OFDM and CDMA is an ideal foundation textbook for those seeking a sound knowledge of this fast-developing field of wideband communications. The advanced transmission techniques of OFDM, applied in wireless LANs and in...
Radio Resource Management Strategies in UMTS
Oriol Sallent
The key feature of future mobile communication systems is the ability to deliver wideband and high bit-rate multimedia services alongside the traditional radio services such as voice, messaging and slow rate data. The broad range of services...
Next Generation Wireless Systems and Networks
MOHSEN GUIZANI
Next Generation Wireless Systems and Networks offers an expert view of cutting edge Beyond 3rd Generation (B3G) wireless applications. This self-contained reference combines the basics of wireless communications, such as 3G wireless standards,...
