химия полимеров
Stem Cells in Toxicology and Medicine
Группа авторов
A comprehensive and authoritative compilation of up-to-date developments in stem cell research and its use in toxicology and medicine Presented by internationally recognized investigators in this exciting field of scientific research Provides an...
Science and Technology of Separation Membranes
Группа авторов
Offers a comprehensive overview of membrane science and technology from a single source Written by a renowned author with more than 40 years’ experience in membrane science and technology, and polymer science Covers all major current...
Experimente rund um die Kunststoffe des Alltags
Prof. Georg Schwedt
Joghurtbecher, Frischhaltefolien, Plastikbeutel, Parkbanke, Warmedammungs- und Verpackungsmaterialien und, und, und … ohne Kunststoffe geht es in unserem Alltag nicht! Georg Schwedt, erfolgreicher Sach- und Lehrbuchautor, prasentiert ein neues...
Teach Yourself the Basics of Aspen Plus
Ralph Schefflan
The complete step-by-step guide to mastering the basics of Aspen Plus software Used for a wide variety of important scientific tasks, Aspen Plus software is a modeling tool used for conceptual design, optimization, and performance monitoring of...
Industrial Coal Gasification Technologies Covering Baseline and High-Ash Coal
Martin Gr?bner
The ongoing discussion about reaching the «peak-oil point» (maximal delivery rate with conventional methods) emphasizes a fundamental change of the frame conditions of oil-based basic products. The alternative with the largest potential is the...
Propellants and Explosives
Naminosuke Kubota
This third edition of the classic on the thermochemical aspects of the combustion of propellants and explosives is completely revised and updated and now includes a section on green propellants and offers an up-to-date view of the thermochemical...
Medical Gases
Hartwig M?ller
Covering the entire spectrum of medical gases, this ready reference offers a comprehensive overview of production, medical gas equipment, medical gas verification, and medical gas safety standards. With a clear focus throughout on safety, the...
Polymer Morphology
Qipeng Guo
With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad...
Sustainable Value Creation in the Fine and Speciality Chemicals Industry
R. Rajagopal
The global fine and speciality chemicals industry is a vital segment within the chemical value chain, catering to a multitude of societal and industrial needs. Regulatory, sustainability and consumer forces have been constantly shaping the...
Green Biocatalysis
Группа авторов
Green Biocatalysis presents an exciting green technology that uses mild and safe processes with high regioselectivity and enantioselectivity. Bioprocesses are carried out under ambient temperature and atmospheric pressure in aqueous conditions...
Plastics Product Design
Paul F. Mastro
This book is aimed at designers who have had limited or no experience with plastics materials as well as a more experienced designer who is designing a part for a use, process or an application that they are not familiar with. The reader is...
Doping in Conjugated Polymers
Pradip Kar
An A-to-Z of doping including its definition, its importance, methods of measurement, advantages and disadvantages, properties and characteristics—and role in conjugated polymers The versatility of polymer materials is expanding because of the...
Design of Multiphase Reactors
Vishwas G. Pangarkar
Details simple design methods for multiphase reactors in the chemical process industries Includes basic aspects of transport in multiphase reactors and the importance of relatively reliable and simple procedures for predicting mass transfer...
Fundamentals of Food Biotechnology
Byong H. Lee
Food biotechnology is the application of modern biotechnological techniques to the manufacture and processing of food, for example through fermentation of food (which is the oldest biotechnological process) and food additives, as well as plant...
Introduction to Chemical Engineering Computing
Bruce A. Finlayson
Step-by-step instructions enable chemical engineers to master key software programs and solve complex problems Today, both students and professionals in chemical engineering must solve increasingly complex problems dealing with refineries, fuel...
Chemical Process Design and Integration
Robin Smith
Written by a highly regarded author with industrial and academic experience, this new edition of an established bestselling book provides practical guidance for students, researchers, and those in chemical engineering. The book includes a new...
microRNAs in Toxicology and Medicine
Saura C. Sahu
During the past decade it has become evident that microRNAs regulate gene expressions and control many developmental and cellular processes in eukaryotic organisms. Recent studies suggest that microRNAs play an important role in toxicogenomics...
Process Modeling and Simulation for Chemical Engineers
Simant R. Upreti
This book provides a rigorous treatment of the fundamental concepts and techniques involved in process modeling and simulation. The book allows the reader to: (i) Get a solid grasp of “under-the-hood” mathematical results (ii) Develop models of...
A Handbook for DNA-Encoded Chemistry
Robert A. Goodnow, Jr.
This book comprehensively describes the development and practice of DNA-encoded library synthesis technology. Together, the chapters detail an approach to drug discovery that offers an attractive addition to the portfolio of existing hit...
Fundamentals of Conjugated Polymer Blends, Copolymers and Composites
Группа авторов
Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or...
Nanoparticulate Drug Delivery Systems
Группа авторов
Frank discussions of opportunities and challenges point the way to new, more effective drug delivery systems Interest in nanomedicine has grown tremendously, fueled by the expectation that continued research will lead to the safe, efficient, and...
Computer Modeling for Injection Molding
Группа авторов
This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding. The...
Formulation of Disperse Systems
Tharwat F. Tadros
This book presents comprehensively the science and technology behind the formulation of disperse systems like emulsions, suspensions, foams and others. Starting with a general introduction, the book covers a broad range of topics like the role...
Green Chemistry for Dyes Removal from Waste Water
Группа авторов
The use of synthetic chemical dyes in various industrial processes, including paper and pulp manufacturing, plastics, dyeing of cloth, leather treatment and printing, has increased considerably over the last few years, resulting in the release...
Pharmazeutische Mikrobiologie
Michael Rieth
In seinem Buch zur pharmazeutischen Mikrobiologie geht Michael Rieth, promovierter Mikrobiologe mit langjahriger Erfahrung in mikrobiologischer Qualitatsprufung in der pharmazeutischen Industrie, auf alle Aspekte dieses fur die Pharmaproduktion...
Sustainable Energy Conversion for Electricity and Coproducts
Ashok Rao
Provides an introduction to energy systems going on to describe various forms of energy sources Provides a comprehensive and a fundamental approach to the study of sustainable fuel conversion for the generation of electricity and for coproducing...
Chemistry and the Sense of Smell
Charles S. Sell
“I cannot recommend this fascinating book highly enough.” –Simon Cotton, Chemistry & Industry, September 2014 “In conclusion: A comprehensive introduction to the world of odours, not only for chemists.” –review in German: Monika Paduch,...
Chemicals and Methods for Conservation and Restoration
Johannes Karl Fink
Before the 1970s, most information concerning the conservation and restoration of paintings, wood, and archaeological artefacts were focused on the history of the artefacts, previous attempts of conservation, and the future use of these...
Glass
Eric Le Bourhis
Glass is a material with essentially unlimited application possibilities. This second edition of a comprehensive reference in glass science, points out the correlation between the performance of industrial processes and practice-relevant...
Chemiestandorte
Группа авторов
Dieses praktisch orientierte Buch prasentiert systematisch neue und aktuelle Konzepte fur Chemiestandorte. Geschrieben von einem renommierten Autorenteam aus Wissenschaft, Beratung & Praxis ist das Buch ein Muss fur jedermann aus dieser Branche.
Operational Excellence
John S. Mitchell
Provides the foundation and tools that are essential for an enterprise to bring Operational Excellence into their organizational culture; gain maximum results, benefits and value Strategies for and implementing details for enterprises at all...
Cathodic Protection
Volkan Cicek
A companion to the title Corrosion Chemistry, this volume covers both the theoretical aspects of cathodic protection and the practical applications of the technology, including the most cutting-edge processes and theories. Engineers and...
Endocrine Disrupters
Peter Matthiessen
Enables researchers to assess the effects of endocrine disrupters as well as comply with new environmental regulations Endocrine disrupters are chemicals—both man-made and natural—that interfere with the body's endocrine system, potentially...
Das Toxikologiebuch
Helmut Greim
Ein internationales Expertenteam unter Leitung eines der renommiertesten deutschen Toxikologen beschreibt die Toxikologie in ihrer gesamten Breite, von grundlegenden Aspekten der molekularen Wirkung von Toxinen uber die Wechselwirkung des...
Chemiereaktoren
Jens Hagen
Kenntnisse der Auslegung und Simulation von Chemiereaktoren sind die Voraussetzung fur den optimalen technischen und wirtschaftlichen Betrieb von chemischen Prozessen. In der neuen Auflage von «Chemiereaktoren» gibt Jens Hagen einen bewahrten...
Sustainable Plastics
Joseph P. Greene
Providing guidelines for implementing sustainable practices for traditional petroleum based plastics, biobased plastics, and recycled plastics, Sustainable Plastics and the Environment explains what sustainable plastics are, why sustainable...
Standard Colorimetry
Claudio Oleari
Colour is a sensation and as such it is a subjective and incommunicable quantity. Colour measurement is possible because we can create a correspondence between colour sensations and the light radiations that stimulate them. This correspondence...
Perfluorinated Chemicals (PFCs)
Nicholas P. Cheremisinoff
This new volume provides a timely study on the environmental challenges from a specific class of perfluorinated chemical compounds (PFCs) that are now being recognized as a worldwide health threat. Recent studies report that levels of classes of...
Polymer Blends and Composites
Muralisrinivasan Natamai Subramanian
Because it is critically important to manufacture quality products, a reasonable balance must be drawn between control requirements and parameters for improved processing method with respect to plastics additives. An important contribution to...
Marine, Waterborne, and Water-Resistant Polymers
Johannes Karl Fink
This book focuses on the chemistry of marine polymers, waterborne polymers, and water-resistant polymers, as well as the special applications of these materials. After the chemistry of marine polymers and their types are discussed, the uses of...
Aspen Plus
Kamal I. M. Al-Malah
Facilitates the process of learning and later mastering Aspen Plus® with step by step examples and succinct explanations Step-by-step textbook for identifying solutions to various process engineering problems via screenshots of the Aspen Plus®...
Crystallization
Группа авторов
Crystallization is a natural occurring process but also a process abundantly used in the industry. Crystallization can occur from a solution, from the melt or via deposition of material from the gas phase (desublimation). Crystals distinguish...
Multivariable Predictive Control
Sandip K. Lahiri
A guide to all practical aspects of building, implementing, managing, and maintaining MPC applications in industrial plants Multivariable Predictive Control: Applications in Industry provides engineers with a thorough understanding of all...
Chemical Risk Assessment
Peter Fisk
This book is an essential guide and support to understanding of the science and policy, procedure and practice that underpins the REACH risk assessments required for the use and placing on the market of chemicals in the European Union. A clear...
Waschmittel
G?nter Wagner
Waschmittel begegnen uns taglich im Haushalt, in der Werbung und im Supermarkt. Sie werden von uns mit gro?er Selbstverstandlichkeit genutzt, doch wissen wir eigentlich, wie moderne Waschmittel zusammengesetzt sind und wie die Inhaltsstoffe...
Microreactors in Preparative Chemistry
Группа авторов
This is the first book in the field to focus on these aspects, providing extremely valuable information unavailable elsewhere for anyone seeking the practical application of microreactor technology in preparative chemistry. The topics covered...
Fundamentals of Industrial Chemistry
John A. Tyrell
This book discusses the connectivity between major chemicals, showing how a chemical is made along with why and some of the business considerations. The book helps smooth a student’s transition to industry and assists current professionals who...
Biopolymers
Группа авторов
As an area of high topical interest, Biopolymers – New materials for Sustainable Films and Coatings covers the development and utilization of polymers derived from bioresources, with a particular focus on film and coating applications. With...
Ion Exchange in Environmental Processes
Arup K. SenGupta
Provides a comprehensive introduction to ion exchange for beginners and in-depth coverage of the latest advances for those already in the field As environmental and energy related regulations have grown, ion exchange has assumed a dominant role...
Cellulose and Cellulose Derivatives in the Food Industry
Tanja Wuestenberg
Cellulose and its derivatives can be found in many forms in nature and is a valuable material for all manner of applications in industry. This book is authored by an expert with many years of experience as an application engineer at renowned...
